# Centos

## Generic

### Enable dual network interfaces for VirtualBox

```
$ cat /etc/sysconfig/network-scripts/ifcfg-enp0s3
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="dhcp"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="enp0s3"
UUID="06a57381-7efb-479a-97bd-29f1b152b896"
DEVICE="enp0s3"
ONBOOT="yes"

$ sudo cp /etc/sysconfig/network-scripts/ifcfg-enp0s3 /etc/sysconfig/network-scripts/ifcfg-enp0s8
$ sudo vi /etc/sysconfig/network-scripts/ifcfg-enp0s8
$ cat /etc/sysconfig/network-scripts/ifcfg-enp0s8
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="dhcp"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="enp0s8"
UUID="06a57381-7efb-479a-97bd-29f1b152b897"
DEVICE="enp0s8"
ONBOOT="yes"

$ sudo ifdown enp0s8 && sudo ifup enp0s8
```

Shutdown, reconfigure the VirtualBox network:

* Adapter 1: Host-only Adapter
* Adapter 2: NAT

Reboot:

```
$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:b1:df:0f brd ff:ff:ff:ff:ff:ff
    inet 192.168.56.103/24 brd 192.168.56.255 scope global noprefixroute dynamic enp0s3
       valid_lft 842sec preferred_lft 842sec
    inet6 fe80::4b38:6c82:1bf5:a68d/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:7c:97:67 brd ff:ff:ff:ff:ff:ff
    inet 10.0.3.15/24 brd 10.0.3.255 scope global noprefixroute dynamic enp0s8
       valid_lft 85104sec preferred_lft 85104sec
    inet6 fe80::f138:6024:b82d:345/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
```

### Install network-scripts as the network manager

```
$ sudo yum install network-scripts
$ sudo systemctl restart network

$ ls /etc/sysconfig/network-scripts/
ifcfg-enp0s3  ifdown-Team      ifdown-ippp  ifdown-routes  ifup-Team      ifup-eth   ifup-plip    ifup-sit          network-functions
ifcfg-enp0s8  ifdown-TeamPort  ifdown-ipv6  ifdown-sit     ifup-TeamPort  ifup-ippp  ifup-plusb   ifup-tunnel       network-functions-ipv6
ifcfg-lo      ifdown-bnep      ifdown-isdn  ifdown-tunnel  ifup-aliases   ifup-ipv6  ifup-post    ifup-wireless
ifdown        ifdown-eth       ifdown-post  ifup           ifup-bnep      ifup-isdn  ifup-routes  init.ipv6-global

$ cat /etc/sysconfig/network-scripts/ifcfg-enp0s8
TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="dhcp"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="enp0s8"
DEVICE="enp0s8"
ONBOOT="yes"
```

## Centos 8

## Centos 7

###


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://brightzheng100.gitbook.io/tech-diary/operation-systems/centos.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.